HDMI Matrix HDBaseT AV over IP

sales@scion-tech.co.uk

Scion-Tech Ltd

Digital Video Distribution

+44 (0) 1635 226450

Description

The SC08.MX1000 is a video over IP solution for high definition signal extension over copper cables. This solution leverages 1G Ethernet switches and enables signal management of 4K/60Hz (4:4:4) signals with virtually zero frame latency. Bi-Directional RS232, USB, Infra-Red and embedded audio are also supported.

The video wall mode allows a single video source to be stretched across multiple displays, each receiver crops and scales the region of interest according to its position in the wall matrix. The receivers are locked to the source and thus to each other with no frame rate conversion. The SC08.MX1000 is managed and controlled using front panel buttons, RS232 or IP control codes over the network using an integrated web browser or from virtually any third party controller, including those from AMX, Crestron, Control4.

Features

> JPEG2000 Compression

> Unicast, Multicast, Matrix, Video Wall up to 9x9

> 18G, 4K/60Hz and HDCP 2.2 compatible

> Latency: Less than 17 to 33 ms

> H.264 Preview Stream

> Analogue Audio Pass Through

> Bi-Directional IR and Full Duplex RS232

> Supports USB for KVM

> Control: Button, TCP/IP, RS232, Web GUI (API’s available)

> PoE (power over Ethernet)

Specifications

Transmitter Connectivity

HDMI Input: 1 x HDMI Type A, 19-Pin Female

HDMI Looped Output: 1 x HDMI Type A, 19-Pin Female

IR Input: 1 x 3.5mm Jack Socket

IR Output: 1 x 3.5mm Jack Socket

RS232: 1 x 3 Pin Phoenix Terminal

USB: 1 x USB Host Type B, 2 x USB Device Type-A

Analogue Audio Input: 3 Pin Phoenix Terminal

Analogue Audio Output: 3 Pin Phoenix Terminal

Relay Signal Control: 2 x 4 Pin Phoenix Terminal

LAN: 1 x RJ45 Data Socket, 1 x Fibre Slot (module not supplied)

Power: 1 x DC Jack Socket

Receiver Connectivity

HDMI Output: 1 x HDMI Type A, 19-Pin Female

IR Input: 1 x 3.5mm Jack Socket

IR Output: 1 x 3.5mm Jack Socket

RS232: 1 x 3 Pin Phoenix Terminal

Analogue Audio Input: 3 Pin Phoenix Terminal

Analogue Audio Output: 3 Pin Phoenix Terminal

USB: 4 x USB Device Type A

LAN: 1 x RJ45 Data Socket, 1 x Fibre Slot (module not supplied)

Power: 1 x DC Jack Socket

Signal

HDMI Signal: HDMI

Standards: HDMI 2.0, HDCP 2.2

Video Bandwidth: 18Gbps

Video Resolutions: 4K/60Hz 4:4:4, 4K/30Hz, 1080p/120Hz

Colour Space: RGB / YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0

Colour Depth: 8-bit

HDMI Audio: LPCM 2CH, 48KHz, 44.1KHz, 32KHz

Analogue Audio: 2CH Stereo

IP Control: Ethernet 10/100

RS232: Full Duplex

IR: 30KHz to 56KHz (940nm)

Power

Type: AC to DC Mains Adaptor

Input: 100~240V AC 50/60Hz

Output: Transmitter 12V/1A, Receiver 12V/1A

Consumption: 2 Watts (max each unit)

PoE: 802.3at PD Device (transmitter and receiver)

Environment

Operating Temperature: 0° to 40°C

Operating Humidity: 20 to 90% RH (no condensation)

Transmitter Dimensions: (W) 200 x (D) 100 x (H) 20

Receiver Dimension: (W) 200 x (D) 100 x (H) 20

Weight: Transmitter 470g, Receiver 475g

Colour: Black

Safety and Emissions: CE, FCC, RoHS

Transmitter Contents

1 x Main Unit (SC08.MX1000-TX)

1 x IR Emitter Cable

1 x IR Sender Cable

1 x 12V/1A Mains Adaptor (used without PoE)

1 x Manual

Receiver Contents

1 x Main Unit (SC08.MX1000-RX)

1 x IR Emitter Cable

1 x IR Sender Cable

1 x 12V/1A Mains Adaptor (used without PoE)

1 x Manual

Contact Us

About Scion

Terms & Conditions

Security & Privacy

Cookie Policy

Scion Tech Ltd

Thatcham

Berkshire

United Kingdom

Copyright © 2015 Scion Tech Ltd

All rights reserved

New Products

HDMI Extenders

HDMI Splitters

HDMI Switches

HDMI Matrix

HDMI over IP

Commercial IPTV

Hospitality IPTV